Network & Protocols Lab 3

1. Look for Switches at the bottom left, Choose the model 2950-24 .
2. Look for End Devices at the bottom left, Choose PC-PT.

3. Look for Connection at bottom left, choose the "Copper Straight-through".
Click on the Switch, Choose F0/1 then drag and click the PC1.
Connect to FastEthernet.

4. Do the same steps for PC 2 to 4.

5. Now, at connection, look for console.
click on the Switch. Connect the Console to the PC1 Console(RS 232).

6.Double Click PC1. (see the pic below)
Everything same as doing the real experiment.

7. Click Terminal, don't change anything and click OK.

8. Follow the steps in the book to do the configuration.

*NOTE: I SKIP STEP 4 . I GOT NO IDEA WHY THE SWTICH TURN OFF AND I CANT ON IT AGAIN. MAYBE U ALL CAN HELP ME WITH THIS.

9. After u finish Step 6 and 7.
u will be able to ping from PC 1 to PC3 ( same Vlan) but u cant ping PC2 and 4.

10. Next,at the bottom left. look for Routers. Choose the 2621 model.

11. Do step 10 configuration. and u will be able to ping from PC 1 to PC 2, 3 & 4 successfully.

12. Do step 12 if u wan.





*NOTE:ANYTHING WRONG INFORM ME!